
When Mölnlycke Health Care’s flagship American production plant officially receives its grand opening today, it still will lack production machinery, some workers’ facilities and finished interior painting and trim.
But even though the plant won’t be churning out high-tech wound dressings until late September, 46 pallets of material arrived Tuesday from Denmark, which was good enough for Mölnlycke Quality Assurance Manager Todd Buccheit.
“We’ve got raw materials,” he said, “so we’re officially in business.”
A group of state and local dignitaries was scheduled to attend a ceremonial ribbon cutting at 11 a.m. today.
After the oversized scissors are put away Monday morning, however, the controlled scramble to finish the shop will resume.
Corporate officials received keys last week to the $15 million, 72,000- square-foot building at 192 Admiral Fitch Ave. that makes the Swedish company the highest-profile anchor tenant at Brunswick Landing since the U.S. Navy departed, leaving the Midcoast Regional Redevelopment Authority to convert it to a civilian center of commerce.
About 60 people initially will be hired, with as many as 60 more during the first 18 months of full production, Buccheit said.
Municipal officials approved a tax-increment financing district around the building in January, which will let the town “capture” some of its taxable development value and use the revenue to pay for infrastructure projects or education funding.
Brunswick’s projected revenue during the life of the TIF could be as much as $14 million.
Additionally, the town agreed to a separate “credit enhancement agreement” that will return to Mölnlycke a percentage of the company’s property and equipment taxes each year for reinvestment in the business.
The Brunswick Landing facility is built to be Mölnlycke’s signature North American presence.
The Swedish health care giant began planning for this day several years ago when it acquired its Wiscasset supplier, Rynel Inc., on Twin Drivers Drive. Rynel manufactures a special, superabsorbent, bacteria-resistant medical foam that Mölnlycke uses in its specialized bandages.
The American market is among the company’s fastestgrowing, so from a business standpoint, company officials have said, it only made sense to have manufacturing and processing in the same hemisphere.
Until now, the European company was paying for the Wiscasset foam to be shipped to Europe for finishing, then shipped back to South Carolina for distribution throughout North and South America.
Although based on a plant in Finland, there are numerous idiosyncratic design features that make Mölnlycke’s facility at Brunswick Landing unique. Among them is a mezzanine corridor that looks down on the production floor.
From this vantage, visitors will see the line as it happens start to finish. A multi-panel mural, also visible from the corridor, will display pictorially each step in the manufacturing process.
Five green spheres — Mölnlycke’s corporate logo — eventually will hang from an open-concept ceiling in the lobby.
The functional touches are no less nuanced.
Color-coordinated stripes on the jamb-edge of each door indicate which areas are commonly accessible and, conversely, which are clean-suit only. Blue is unrestricted; yellow is “controlled.”
Green is the highest level of control: only full suits, scrubs and sterilized underclothes are allowed across the green stripe.
Then there is the science and engineering that contributed to the physical plant, as well as the eventual finished product.
“All of our decisions here — and I mean everything — are data driven,” Buccheit said. “There’s no shooting from the hip, there’s no making things up as we go. It’s all done from data and measurements, and that’s where the fun science parts come in.”
Airflow, particulate management and detection of microbial contamination are the three supporting legs of Mölnlycke’s quality control system.
Four monstrous climate control machines reside in the space above the production floor. They maintain pressurization and temperature throughout the 72,000- square-foot structure.
Electronic air quality monitors are stationed at every portal where controlled and common areas intersect. Open a door, and its resident monitor starts to blink and beep, charting the drop in air pressure. When too low, a red alarm light shows and the system begins to chirp. Close the door, and within 10 seconds the area is repressurized to the building’s design specification of 15 Pascals above atmosphere.
(For the technically curious: A Pascal is equal to .0014 pounds per square inch of atmospheric pressure. At sea level, the weight of earth’s atmosphere presses in on us at about 15 pounds per square inch, which means that Mölnlycke’s interior climate is maintained at approximately 15.31 psi.)
It’s not much, but it’s just enough to create a pressurized airflow from top down, and from inside out.
The pressure differential means that “clean air from the production floor is always pushing ‘dirty’ air out, through the warehouse, toward the outside of the building,” Buccheit said.
The 26,600-square-foot “clean room” production floor is the heart of the facility. Every other room and system is designed around, and for the benefit of, its atmospheric and sterilization integrity. An intermediary room between warehouse and production floor, called a “materials sluice,” is where raw materials are cleaned and sterilized before becoming part of the production chain.
Even the ceiling was built and sealed so light bulbs could be changed from above, without ever entering the controlled work space.
At full bore, the facility will turn out 56 million bandages, dressings and other products in a year.
Mölnlycke’s margin for error is one bad bandage per 1 million units produced. That means 56 bandages per year can contain detectable microbial contamination without flunking an entire batch.
Administratively, the entire building is wireless and has its own server room. With future growth in mind, a conduit was run underground between Mölnlycke and nearby Oxford Networks, just in case the company needs offsite web hosting in the future.
“It cost us pennies on the dollar to run the conduit, just in case,” Buccheit said. “Everything about the new facility was done with respect to forward thinking.”
Addtionally, a fiber-optic line was strung between the Brunswick and Wiscasset plants to allow faster communication.
Meeting and conference rooms at each of Mölnlycke’s sites are named for local landmarks — Boothbay, Sheepscot and Twin Rivers, for example — to eliminate confusion when connecting conference calls.
At the western end of the administrative wing, a dedicated public work station provides room for visiting officials.
Administrators from Mölnlycke’s 12 facilities frequently globe-hop, and finding them a place to work can be problematic.
“We used to have to look around, say ‘Who’s not here this week?’ and then stick whoever was visiting at their work station,” Buccheit said. “This time, we decided to have a dedicated work space where visiting officials they could just sit down, plug in their laptops and instantly be connected to Mölnlycke’s global network.”
Or they can use the “Lighthouse,” a private and windowless room, painted a similar green as the “restricted area” indicators. It bristles with data and communications ports, and will be used for secure video and voice conferencing.
Full production is scheduled to begin in late September.
jtleonard@timesrecord.com
Comments are not available on this story. Read more about why we allow commenting on some stories and not on others.
We believe it's important to offer commenting on certain stories as a benefit to our readers. At its best, our comments sections can be a productive platform for readers to engage with our journalism, offer thoughts on coverage and issues, and drive conversation in a respectful, solutions-based way. It's a form of open discourse that can be useful to our community, public officials, journalists and others.
We do not enable comments on everything — exceptions include most crime stories, and coverage involving personal tragedy or sensitive issues that invite personal attacks instead of thoughtful discussion.
You can read more here about our commenting policy and terms of use. More information is also found on our FAQs.
Show less